Plate calculator

Enter the weight you want to lift and see the plates for each side of the bar. Switch to dip belt for weighted pull-ups and dips.

Your lift
Bar
kg
Plates you have Tap to leave one out
Each side of the bar
40kg per side

Warm-up loads

Set Weight Plates

Keep every set

Calitracker logs the weight of every set, for barbell lifts and weighted pull-ups and dips, so you can see your lifts go up over time. Logging is free, with no ads.

Free, no ads, on iOS and Android

How to load a barbell

Subtract the bar from the target weight and halve the rest. That is the weight for each side. Load the heaviest plates first, closest to the middle, and match both sides.

Example: 100 kg on a 20 kg bar leaves 80 kg, so 40 kg per side: one 25, one 10 and one 5. On a dip belt nothing is halved. All the plates hang on one chain.

Standard bars and plates

Common gym equipment. Check your gym's bar, some weigh 15 kg or less.
Equipmentkglb
Men's Olympic bar20 kg45 lb (20.4 kg)
Women's Olympic bar15 kg35 lb (15.9 kg)
Technique or EZ bar10 kg25 lb
Plates25, 20, 15, 10, 5, 2.5, 1.2545, 35, 25, 10, 5, 2.5

Common questions

How much does a barbell weigh?

A men's Olympic bar weighs 20 kg, or 45 lb in US gyms. A women's bar weighs 15 kg or 35 lb. Ask if you are unsure, some gym bars are lighter.

Do collars count toward the weight?

Spring clips weigh very little and are usually ignored. Competition collars weigh 2.5 kg each, so add 5 kg if you use them.

How do I load a dip belt?

Thread the chain through the plates, heaviest first, and clip it back to the belt. All the weight is on one chain, so the calculator does not halve it.

Is 20 kg the same as 45 lb?

Close. 45 lb is 20.4 kg, so a 45 lb bar is slightly heavier than a 20 kg one.